Guillemot Driver
Iain Oughtred’s Guillemot is a multipurpose boat intended for rowing and for sailing with either a gunter or lug rig. He designed the boat 25 years ago and based it on the lines of a 19th-century ship’s boat or large yacht’s tender. It is intended to accommodate three adults comfortably, but could take as many as five over short distances in benign conditions.
Guillemot thrustmaster force feedback racing wheel. I have a guillemot thrustmaster force feedback racing wheel and i have windows 7 x32 and the drivers of my wheel are not compatible with the operating system what should i do for the wheel works? I realy want to play racing games with this on windows 7.
Oughtred is best known for applying contemporary glued-lap plywood construction to traditional hull forms, and the Guillemot was primarily intended for that method. Glued-lap plywood has several advantages: it is easier to source the materials, easier to build, and results in a lighter boat. The Guillemot can also be cold-molded, strip-planked, or built in traditional lapstrake.
The following hardware are compatible in macOS 10.14 Mojave with Hercules drivers DJSeriesInstall 5.99s and later: - Deejay Trim 4-6 - DJ Console Mk2 - DJ Console Mk4 - DJ Console Rmx. Just a heads up as I've only just discovered myself, Thrustmaster have released (must've been fairly recently) drivers for some of the older wheels to make them compatible with windows 10 and 8/8.1 I have a Thrustmaster F430 FFB and until i installed these drivers F1 2015 has been unplayable for me, mainly due to the brake pedal sensitivity.
- GUILLEMOT/HERCULES Drivers. 7 drivers total Last updated: Nov 9th 2007, 08:14 GMT RSS Feed. Latest downloads from GUILLEMOT/HERCULES in Digital Camera / Webcam / Camcorder. Sort by: last update. Hercules Blog Webcam Driver 2.6.0.0 38,485 downloads.
- Access to Official Website Guillemot Home English Home French Welcome to the HelpDrivers, driver for printers. Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. Are those originally provided by the official manufacturers.
Regina Frei, a student at England’s Lyme Regis Boatbuilding Academy, opted for traditional lapstrake construction. Of the 319 sets of plans for the Guillemot sold to date, Oughtred believes that about 10 percent of the boats built have been traditional lapstrake, but suspects that percentage has increased in recent years. A glued-lap plywood hull is normally around 125 lbs; a traditional lapstrake one would be about 25–40 lbs heavier.
The plans include full-sized patterns for the stem, transom, floors, and temporary molds, and no lofting is required, but the Academy requires that students begin their projects with lofting, so Regina drew the lines from the offsets included with the plans, faired them, and created her own patterns. Oughtred’s drawings provide guidance for traditional construction, including scantlings for planking and steam-bent frames, frame spacing, and a recommendation for nine or ten strakes instead of the eight on the glued-plywood boats.
Aside from the applewood from her Swiss homeland that Regina used for the transom, she purchased sustainable materials and locally sourced timber as much as possible. The Douglas-fir for the spars came from the Stourhead estate less than 50 miles away from Lyme Regis, and the larch planking stock came from Scotland. (British boatbuilders generally agree that the farther north larch is grown, the better it is.) The ribs, thwarts, and stem were made of English chestnut, and the rest of the centerline structure, along with the inwales, outwales, and sheerstrake rubbing strips, were of Forest Stewardship Council (FSC) certified oak. When an adhesive was required, she used a bio-based epoxy.
Oughtred’s plans for glued-ply construction specify that the hull should be built upside down, but he agrees with Regina’s decision to build her boat right-side up to allow easier access inside the hull for clenching nails or, as Regina chose to do, peening rivets. The assembled centerline was set up on a base structure, and seven temporary molds were then fitted on the keel hog and braced with supports going up to the workshop ceiling. Regina initially lined the hull for eight strakes, but this convinced her that she would be wise to follow Oughtred’s advice and fit a ninth strake. She then re-spiled accordingly, to more easily get the planks to follow the shape of the boat.
Regina had to steam the forward ends of the bottom three strakes and the aft ends of the top three so the 5/16″ larch planking could take the twist required by the shape in those areas. With planking complete, she removed the molds, fitted the centerboard case, and then steamed in the 1/2″ x 5/8″ English chestnut ribs and riveted them in place. The two thwarts followed, and instead of using the sawn knees indicated in the plans, she fitted a single steamed chestnut knee at each thwart end. Oughtred felt that single steam-bent knee might not be strong enough: “I would suggest that two each side should be adequate. Very neat, in fact; a lot more comfortable if sitting on the thwart, leaning against the gunwale, which you can’t really do, with the usual single knee.” Installing the seats in the bow and stern came next, followed by the oak outwales, inwales, and rubbing strips.
The whole boat was coated, inside and out, with a “boat soup” of tung oil, linseed oil, turpentine, and Stockholm tar, the last coat of which also had some Japan drier in it.
FTDI USB Serial Cable Drivers Drivers for GEMS USB to serial comms cables should be automatically installed by Windows, if they are not, please use the following: Windows XP-8 (32bit) Windows XP-8 (64bit) Aten USB to Serial Converter Drivers. Gems-it driver download for windows 10.
Regina opted for the gunter rig with 72 sq ft of sail (the lug rig has 62 sq ft), “because it looks nicer and it will be more interesting to sail with a jib as well as a mainsail.” The mast is stepped on the keel hog immediately forward of the forward rowing thwart with no deck-level support. It has two shrouds anchored at the gunwale and a forestay connected to a bronze stemhead fitting that also takes the jib tack. The lug rig has an unstayed mast with partners spanning the gunwales at sheer height. Oughtred is considering adding something similar, perhaps at thwart height, to the plans for the gunter rig to allow easier stepping for the singlehander, although shrouds would still be required to brace the mast and provide support for the jib.
As soon as Regina’s Guillemot, christened LEAF, was launched, she rowed her out of the Lyme Regis harbor while her crew—Dan Adam-Azikri—prepared the rig. She rowed from the forward of the two rowing thwarts, and this would have been perfectly satisfactory but for the fact that the yard, boom, and sail were on the centerline ready to be hoisted, requiring Regina to row from an offset position. The centerboard and rudder blade were lowered, the sails that Regina made during a weeklong sailmaking course at the Academy were hoisted, and LEAF was underway. There was quite a chop in Lyme Bay for such a small boat, and only one other boat dared venture out of the harbor to sail. LEAF appeared to handle the conditions nicely, and I soon got the chance to see this up close after Regina and Dan rowed back into the harbor to fetch me.
Guillemot Drivers
Hanns g driver download for windows 10 32 bit. Although there was some initial concern that the boat might be a little crowded with three of us aboard, the larger crew did give us an advantage in rowing and hoisting sails: Regina and Dan took an oar each in the aft rowing position and kept us head-to-wind while I sat comfortably in the bow seat and hoisted the sails from forward side of the mast. Dan and I then sat on the sternsheets benches either side of the tiller and took turns steering while Regina sat on the forward thwart and moved from side to side as we tacked to keep the boat level. We quickly got used to this arrangement agreed that it didn’t feel at all crowded. Had it been windier, we would have needed to get more of our weight to windward, but there would have been adequate space for us to do so.
The Guillemot’s performance was impressive. The gunter rig was easily managed, and we never seemed in danger of getting caught in irons when tacking. It was surprisingly easy to steer through the waves both upwind and downwind. The freeboard was just enough to give us a reasonably dry ride. While the wind was fairly constant, in the gusts that we did have, we didn’t have to react quickly to spill the wind from the mainsail or move our weight to the weather rail to keep the boat under us. It was clear that Oughtred had put an emphasis on safe, steady sailing so “you don’t have to hang out to keep her upright.” Still, the Guillemot was enjoyably lively. Oughtred later told me that he himself had been quite surprised at how lively the Guillemot was when he first sailed one.
Regina–an experienced rower–later had a chance to row LEAF properly without having the mainsail and its spars in the way. She was by herself in the boat rowing from the forward thwart and was really pleased with the performance. Oughtred later told me that although that is the favorable position for a singlehander as the boat is currently configured, it would be better still to have single ’midships thwart aft of the opening in the top of the centerboard case where the rower’s weight would put the Guillemot in better fore-and-aft trim. He is thinking of adding this to the plans as an alternative to the two thwarts that LEAF has.
The Guillemot is a really nice and functional all-round sailing and rowing boat and it will take a small outboard, too. The boat is eminently suitable for two or three adults, or perhaps better still, a family of four with young children. It is especially pretty when built in the traditional manner.
Nigel Sharp is a lifelong sailor and a freelance marine writer and photographer. He spent 35 years in managerial roles in the boat building and repair industry and has logged thousands of miles in boats big and small, from dinghies to schooners.
Guillemot Particulars
| Length | 11' 5' |
| Beam | 4' 5' |
| Weight | 143 lbs |
| Sail area | lug, 62 sq ft; gunter sloop, 72 sq ft |
Plans for the Guillemot are available through the WoodenBoat Store and Oughtred Boats.
Guillemot Race Leader Force Feedback Driver
Is there a boat you’d like to know more about? Have you built one that you think other Small Boats Monthly readers would enjoy? Fujitsu camera driver. Please email us!